Below is the complete process i followed to install ASE, Please advise.
[root@localhost home]# cd 2931
[root@localhost 2931]# ls
archives Documents Public sysam_utilities
ase160_linuxx86-64_2 Downloads sample_response.txt Templates
ase160_linuxx86-64_2.tgz Music setup.bin ThirdPartyLegal
Desktop Pictures sysam_setup Videos
[root@localhost 2931]# ./setup.bin -i console
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
===============================================================================
SAP Adaptive Server Enterprise (created with InstallAnywhere)
-------------------------------------------------------------------------------
Preparing CONSOLE Mode Installation...
===============================================================================
Introduction
------------
InstallAnywhere will guide you through the installation of SAP Adaptive Server
Enterprise 16.0 GA PL01.
It is strongly recommended that you quit all programs before continuing with
this installation.
Respond to each prompt to proceed to the next step in the installation. If you
want to change something on a previous step, type 'back'.
You may cancel this installation at any time by typing 'quit'.
PRESS <ENTER> TO CONTINUE:
===============================================================================
Choose Install Folder
---------------------
Where would you like to install?
Default Install Folder: /opt/sap
ENTER AN ABSOLUTE PATH, OR PRESS <ENTER> TO ACCEPT THE DEFAULT
:
===============================================================================
Choose Install Set
------------------
Please choose the Install Set to be installed by this installer.
->1- Typical
2- Full
3- Customize...
ENTER THE NUMBER FOR THE INSTALL SET, OR PRESS <ENTER> TO ACCEPT THE DEFAULT
:
===============================================================================
Software License Type Selection
-------------------------------
What would you like to do?
->1- Install licensed copy of SAP Adaptive Server Enterprise
2- Install Free Developer Edition of SAP Adaptive Server Enterprise
3- Install Express Edition of SAP Adaptive Server Enterprise
4- Evaluate SAP Adaptive Server Enterprise
Enter one of the options above: 2
===============================================================================
End-user License Agreement
--------------------------
1) All regions
Please enter the number of the location you are installing. (1-1) (DEFAULT:
1): 1
LICENSE AGREEMENT
SAP(r) ADAPTIVE SERVER(r) ENTERPRISE
DEVELOPER'S EDITION
VERSION 16.0.x
NOTICE TO USER: Scroll down and read this License
Agreement (this "Agreement") carefully. This is a legally
binding Agreement between you (or your employer or company,
as applicable) ("Licensee" or "You") and the SAP entity
authorized to distribute the Program (as defined below) in
the country in which you are located ("SAP").
By clicking "Accept" or "Agree," You agree to all of the
terms and conditions stated in this Agreement. If You do
not agree to these terms, do not click "Accept" or "Agree."
If You are entering into this Agreement on behalf of your
employer or company, You represent and warrant that You have
Press ENTER to read the text [Type 'back' and press ENTER to skip the text]
: back
I agree to the terms of the SAP license for the install location specified.
(Y/N): Y
===============================================================================
Pre-Installation Summary
------------------------
Please Review the Following Before Continuing:
Product Name:
SAP Adaptive Server Enterprise
Install Folder:
/opt/sap
Product Features:
Adaptive Server Enterprise,
Open Client,
DB-Library,
jConnect 16.0 for JDBC,
Interactive SQL,
QPTune,
SySAM License Utilities,
Remote Command and Control Agent for Adaptive Server,
ASE ODBC Driver,
ASE Extension Module for Python,
ASE Database Driver for PERL,
ASE Extension Module for PHP,
SAP Control Center,
Management User Interface for SAP Adaptive Server
Disk Space Information (for Installation Target):
Required: 2,353,448,700 Bytes
Available: 30,757,298,176 Bytes
PRESS <ENTER> TO CONTINUE:
===============================================================================
Ready To Install
----------------
InstallAnywhere is now ready to install SAP Adaptive Server Enterprise onto
your system at the following location:
/opt/sap
PRESS <ENTER> TO INSTALL:
===============================================================================
Installing...
-------------
[==================|==================|==================|==================]
[------------------|------------------|------------------|------------------]
===============================================================================
Configure New Servers
---------------------
The SAP Adaptive Server Enterprise includes products that require
configuration. If you choose to configure the products on this screen, you
will be given the option to specify custom values for each product. If you
choose not to configure the products now, you can configure them later.
Please deselect any products that you do not want to configure now :
[X] 1 - Configure new Adaptive Server
[X] 2 - Configure new Backup Server
[X] 3 - Configure new XP Server
[X] 4 - Configure new Job Scheduler
[X] 5 - Enable Self Management
[X] 6 - Configure SAP Control Center
To select an item enter its number, or 0 when you are finished: (DEFAULT: 0)
===============================================================================
Configure Servers with Different User Account
---------------------------------------------
Do you want to configure the server(s) under different user account?
1- Yes
->2- No
Enter one of the options above: 2
===============================================================================
User Configuration Data Directory
---------------------------------
Enter the directory where you want to store user data files such as interfaces
file, RUN_<server> file, error log, etc.. The files for the server(s) you about
to create will be placed in this directory.
Data Directory (DEFAULT: /opt/sap):
===============================================================================
Configure New Adaptive Server
-----------------------------
Adaptive Server Name (DEFAULT: LOCALHOST):
System Administrator's Password:
Confirm System Administrator's Password:
Port Number (DEFAULT: 5000):
Error Log (DEFAULT: /opt/sap/ASE-16_0/install/LOCALHOST.log):
Application Type
->1- Mixed (OLTP/DSS)
2- Online Transaction Proccessing (OLTP)
3- Decision Support Systems (DSS)
Select an application type: 1
Page Size
1- 2k
->2- 4k
3- 8k
4- 16k
Select a page size: 2
Warning: You have selected 4k as the logical page size for the
Adaptive Server. If you plan to load dump from another database,
make sure this logical page size matches the size of the source
database. The default logical page size in previous Adaptive Server
versions was 2KB.
PRESS <ENTER> TO CONTINUE:
->1- us_english
Default Language: 1
1- cp437 : Code Page 437, (United States) character set.
2- cp850 : Code Page 850 (Multilingual) character set.
3- iso15 : ISO_8859-15:1998, Latin9, Western Europe
->4- iso_1 : ISO 8859-1 (Latin-1) - Western European 8-bit character set.
5- mac : Macintosh default character set for Western European locales.
6- roman8 : Hewlett-Packard proprietary character set for European locales.
7- roman9 : Hewlett-Packard proprietary character set for European locales.
8- utf8 : Unicode 3.1 UTF-8 Character Set
Default Character Set:
->1- bin_iso_1 : Binary ordering, for the ISO 8859/1 or Latin-1 character set
(iso_1).
2- dictionary_iso_1 : General purpose dictionary ordering.
3- espdict_iso_1 : Spanish dictionary ordering.
4- espnoaccents_iso_1 : Spanish case and accent insensitive dictionary order.
5- espnocase_iso_1 : Spanish case insensitive dictionary order.
6- noaccents_iso_1 : Dictionary order, case insensitive, accent insensitive.
7- nocase_iso_1 : Dictionary order, case insensitive.
8- nocasepref_iso_1 : Dictionary order, case insensitive with preference.
Default Sort Order:
Optimize ASE Configuration
->1- No
2- Yes
Do you want to optimize ASE configuration?:
Create sample databases
->1- No
2- Yes
Do you want to create sample databases?: 2
Master Device (DEFAULT: /opt/sap/data/master.dat):
Master Device Size (MB) (DEFAULT: 65):
Master Database Size (MB) (DEFAULT: 26):
System Procedure Device (DEFAULT: /opt/sap/data/sysprocs.dat):
System Procedure Device Size (MB) (DEFAULT: 196):
System Procedure Database Size (MB) (DEFAULT: 196):
System Device (DEFAULT: /opt/sap/data/sybsysdb.dat):
System Device Size (MB) (DEFAULT: 6):
System Database Size (MB) (DEFAULT: 6):
Tempdb Device (DEFAULT: /opt/sap/data/tempdbdev.dat):
Tempdb Device Size (MB) (DEFAULT: 100):
Tempdb Database Size (MB) (DEFAULT: 100):
Enable PCI
->1- No
2- Yes
Do you want to configure PCI/JAVA?:
===============================================================================
Configure New Backup Server
---------------------------
Backup Server Name (DEFAULT: LOCALHOST_BS):
Port Number (DEFAULT: 5001):
Error Log (DEFAULT: /opt/sap/ASE-16_0/install/LOCALHOST_BS.log):
Allow Hosts (DEFAULT: ):
===============================================================================
Configure New XP Server
-----------------------
Port Number (DEFAULT: 5002):
Error Log (DEFAULT: /opt/sap/ASE-16_0/install/LOCALHOST_XP.log):
===============================================================================
Configure New Job Scheduler
---------------------------
Job Scheduler Agent Name (DEFAULT: LOCALHOST_JSAGENT):
Port Number (DEFAULT: 4900):
Management Device (DEFAULT: /opt/sap/data/sybmgmtdb.dat):
Management Device Size (MB) (DEFAULT: 76):
Management Database Size (MB) (DEFAULT: 76):
===============================================================================
Configure Self Management
-------------------------
Self Management User Name (DEFAULT: sa):
===============================================================================
SAP Control Center - Configure Self Discovery Service Adaptor
-------------------------------------------------------------
Discovery Services provide client applications the ability to find Sybase
resources within an enterprise environment without the need for local interface
file definitions. SAP Control Center currently supports two discovery methods:
JINI and UDP.
JINI requires a dedicated JINI server to provide discovery services and can
provide these services throughout the enterprise. UDP does not require a
dedicated server but is limited to discovery within the local subnet.
Do you want to configure UDP Adaptor? (Y/N): Y
Do you want to configure JINI Adaptor? (Y/N): Y
Please set following properties for JINI Adaptor.
JINI Host Name (DEFAULT: localhost):
JINI Port Number (DEFAULT: 4160):
JINI Heart Beat Period (seconds) (DEFAULT: 900):
===============================================================================
SAP Control Center - Configure HTTP Ports
-----------------------------------------
SAP Control Center needs HTTP and HTTPS ports that do not conflict with ports
used by other applications and services on this system. Accept the default
ports or specify other, unused ports.
HTTP Port: [integer (1025-65535)] (DEFAULT: 8282): HTTPS Port: [integer (1025-65535)] (DEFAULT: 8283):
===============================================================================
SAP Control Center - Configure RMI Port
---------------------------------------
The RMI service needs to use a port that is not used by other applications or
services on this system. Accept the default port or specify an unused port.
RMI Port: [integer (1025-65535)] (DEFAULT: 9999):
===============================================================================
SAP Control Center - Configure Administration Logins
----------------------------------------------------
Set the password for the SAP Control Center administrator. You can also change
the administrator's login ID.
SCC administrator user (DEFAULT: sccadmin):
SCC administrator password:
Confirm SCC administrator password:
SCC agent administrator user (DEFAULT: uafadmin):
SCC agent administrator password:
Confirm SCC agent administrator password:
===============================================================================
SAP Control Center - Configure Repository Password
--------------------------------------------------
Set the SAP Control Center repository password.
SCC repository password:
Confirm SCC repository password:
===============================================================================
New Server Configuration Summary
--------------------------------
Adaptive Server
Adaptive Server Name LOCALHOST
Port Number 5000
Application Type Mixed (OLTP/DSS)
Create sample databases true
Page Size 4k
Error Log /opt/sap/ASE-16_0/install/LOCALHOST.lo
Master Device /opt/sap/data/master.dat
Master Device Size (MB) 65
Master Database Size (MB) 26
System Procedure Device /opt/sap/data/sysprocs.dat
System Procedure Device Size (MB) 196
System Procedure Database Size (MB) 196
System Device /opt/sap/data/sybsysdb.dat
System Device Size (MB) 6
System Database Size (MB) 6
Tempdb Device /opt/sap/data/tempdbdev.dat
Tempdb Device Size (MB) 100
Tempdb Database Size (MB) 100
Default Language <use default>
Default Character Set <use default>
Default Sort Order <use default>
Backup Server
Backup Server Name LOCALHOST_BS
Port Number 5001
Error Log /opt/sap/ASE-16_0/install/LOCALHOST_BS
XP Server
XP Server Name LOCALHOST_XP
Port Number 5002
Error Log /opt/sap/ASE-16_0/install/LOCALHOST_XP
Job Scheduler
Job Scheduler Agent Name LOCALHOST_JSAGENT
Port Number 4900
Management Device /opt/sap/data/sybmgmtdb.dat
Management Device Size (MB) 76
Management Database Size (MB) 76
Self Management
Self Management User Name sa
Self Management User Password ******
SAP Control Center - Configure Self Discovery Service Adaptor
adaptor JINI
Host Name localhost
Port Number 4160
JINI Heart Beat Period (seconds) 900
SAP Control Center - Configure HTTP Ports
SCC HTTP Port 8282
SCC HTTPS Port 8283
SAP Control Center - Configure RMI Port
RMI Port 9999
SAP Control Center - Configure Administration Logins
SCC administrator user sccadmin
SCC administrator password ******
SCC agent administrator user uafadmin
SCC agent administrator password ******
SAP Control Center - Configure Repository Password
SCC repository password ********
Do you want to continue? (DEFAULT: yes):
===============================================================================
Configure New Adaptive Server
-----------------------------
Warning: You have selected '4k' as the logical page size for the SAP Adaptive
Server Enterprise. If you plan to load dump from another database, make sure
this logical page size matches the size of the source database. The default
logical page size in previous SAP Adaptive Server Enterprise versions was 2KB.
Building SAP Adaptive Server Enterprise 'LOCALHOST':
Writing entry into directory services...
Directory services entry complete.
Building master device...
Master device complete.
Writing RUN_LOCALHOST file...
RUN_LOCALHOST file complete.
Starting server...
Server started.
Set SA password...
SA password is set.
Building sysprocs device and sybsystemprocs database...
sysprocs device and sybsystemprocs database created.
Running installmaster script to install system stored procedures...
installmaster: 10% complete.
installmaster: 20% complete.
installmaster: 30% complete.
installmaster: 40% complete.
installmaster: 50% complete.
installmaster: 60% complete.
installmaster: 70% complete.
installmaster: 80% complete.
installmaster: 90% complete.
installmaster: 100% complete.
installmaster script complete.
Creating two-phase commit database...
Two phase commit database complete.
Extending tempdb database ...
Extending tempdb database complete.
Installing common character sets (Code Page 437, Code Page 850, ISO Latin-1,
Macintosh and HP Roman-8)...
Character sets installed.
Setting server name in SAP Adaptive Server Enterprise...
Server name added.
Setting optimization goal...
Setting optimization goal complete.
Server 'LOCALHOST' was successfully created.
===============================================================================
Create sample databases
-----------------------
Cannot run /opt/sap/OCS-16_0/bin/isql - exec failed (ENOENT).
Failed to Create sample databases
PRESS <ENTER> TO CONTINUE:
===============================================================================
Create sample databases
-----------------------
Cannot run /opt/sap/OCS-16_0/bin/isql - exec failed (ENOENT).
Failed to Create sample databases
PRESS <ENTER> TO CONTINUE:
===============================================================================
Configure New Backup Server
---------------------------
Building Backup Server 'LOCALHOST_BS':
Writing entry into directory services...
Directory services entry complete.
Writing RUN_LOCALHOST_BS file...
RUN_LOCALHOST_BS file complete.
Starting server...
Server started.
Server 'LOCALHOST_BS' was successfully created.
===============================================================================
Configure New XP Server
-----------------------
Building XP Server 'LOCALHOST_XP':
Writing entry into directory services...
Directory services entry complete.
Setting server name in SAP Adaptive Server Enterprise...
Server name added.
Server 'LOCALHOST_XP' was successfully created.
'LOCALHOST_XP' will be started when needed by the SAP Adaptive Server
Enterprise.
===============================================================================
Configure New Job Scheduler
---------------------------
===============================================================================
Configure New Job Scheduler
---------------------------
Building Job Scheduler 'LOCALHOST_JSAGENT':
Writing entry into directory services...
Directory services entry complete.
Installing required script(s) in related SAP Adaptive Server Enterprise...
installjsdb: 10% complete.
installjsdb: 20% complete.
installjsdb: 30% complete.
installjsdb: 40% complete.
installjsdb: 50% complete.
installjsdb: 60% complete.
installjsdb: 70% complete.
installjsdb: 80% complete.
installjsdb: 90% complete.
installjsdb: 100% complete.
jst_get_object_quoted_name: 10% complete.
jst_get_object_quoted_name: 20% complete.
jst_get_object_quoted_name: 30% complete.
jst_get_object_quoted_name: 100% complete.
jst_check_reorg_space: 10% complete.
jst_check_reorg_space: 20% complete.
jst_check_reorg_space: 30% complete.
jst_check_reorg_space: 100% complete.
jst_database_names: 10% complete.
jst_database_names: 20% complete.
jst_database_names: 30% complete.
jst_database_names: 100% complete.
jst_get_index_names: 10% complete.
jst_get_index_names: 20% complete.
jst_get_index_names: 30% complete.
jst_get_index_names: 100% complete.
jst_get_datachange: 10% complete.
jst_get_datachange: 20% complete.
jst_get_datachange: 100% complete.
jst_get_datestr: 10% complete.
jst_get_datestr: 20% complete.
jst_get_datestr: 30% complete.
jst_get_datestr: 100% complete.
jst_get_freespace: 10% complete.
jst_get_freespace: 20% complete.
jst_get_freespace: 100% complete.
jst_get_mdcache_type_config: 10% complete.
jst_get_mdcache_type_config: 20% complete.
jst_get_mdcache_type_config: 30% complete.
jst_get_mdcache_type_config: 40% complete.
jst_get_mdcache_type_config: 100% complete.
jst_get_usedspace: 10% complete.
jst_get_usedspace: 20% complete.
jst_get_usedspace: 100% complete.
jst_reconf_mdcache_type: 10% complete.
jst_reconf_mdcache_type: 20% complete.
jst_reconf_mdcache_type: 30% complete.
jst_reconf_mdcache_type: 100% complete.
jst_version_num: 10% complete.
jst_version_num: 20% complete.
jst_version_num: 30% complete.
jst_version_num: 100% complete.
jst_valid_ase_version: 10% complete.
jst_valid_ase_version: 20% complete.
jst_valid_ase_version: 30% complete.
jst_valid_ase_version: 40% complete.
jst_valid_ase_version: 50% complete.
jst_valid_ase_version: 100% complete.
jst_delete_statistics: 10% complete.
jst_delete_statistics: 20% complete.
jst_delete_statistics: 30% complete.
jst_delete_statistics: 100% complete.
jst_dump_databases: 10% complete.
jst_dump_databases: 20% complete.
jst_dump_databases: 30% complete.
jst_dump_databases: 40% complete.
jst_dump_databases: 50% complete.
jst_dump_databases: 60% complete.
jst_dump_databases: 100% complete.
jst_dump_logs: 10% complete.
jst_dump_logs: 20% complete.
jst_dump_logs: 30% complete.
jst_dump_logs: 40% complete.
jst_dump_logs: 50% complete.
jst_dump_logs: 60% complete.
jst_dump_logs: 70% complete.
jst_dump_logs: 100% complete.
jst_reclaim_index_space: 10% complete.
jst_reclaim_index_space: 20% complete.
jst_reclaim_index_space: 30% complete.
jst_reclaim_index_space: 100% complete.
jst_reclaim_table_space: 10% complete.
jst_reclaim_table_space: 20% complete.
jst_reclaim_table_space: 30% complete.
jst_reclaim_table_space: 100% complete.
jst_reconf_locks: 10% complete.
jst_reconf_locks: 20% complete.
jst_reconf_locks: 100% complete.
jst_reconf_mdcache: 10% complete.
jst_reconf_mdcache: 20% complete.
jst_reconf_mdcache: 100% complete.
jst_reconf_usr_conns: 10% complete.
jst_reconf_usr_conns: 20% complete.
jst_reconf_usr_conns: 30% complete.
jst_reconf_usr_conns: 100% complete.
jst_reorg_rebuild_indexes: 10% complete.
jst_reorg_rebuild_indexes: 20% complete.
jst_reorg_rebuild_indexes: 100% complete.
jst_reorg_rebuild_tables: 10% complete.
jst_reorg_rebuild_tables: 20% complete.
jst_reorg_rebuild_tables: 30% complete.
jst_reorg_rebuild_tables: 100% complete.
jst_update_statistics: 10% complete.
jst_update_statistics: 20% complete.
jst_update_statistics: 30% complete.
jst_update_statistics: 40% complete.
jst_update_statistics: 100% complete.
jst_svr_update_statistics: 10% complete.
jst_svr_update_statistics: 20% complete.
jst_svr_update_statistics: 30% complete.
jst_svr_update_statistics: 40% complete.
jst_svr_update_statistics: 50% complete.
jst_svr_update_statistics: 100% complete.
Installing SybBackupDbToDiskTemplate.xml in the SAP Adaptive Server
Enterprise...
Task failed
----------------------------------------------------------------
W E L C O M E T O
TemplateImport Utility [version 1.11] Apr 1, 2015 2:26:31 AM
Runtime Switches:
TemplateImport Properties:
Server_Machine_Name: localhost
Server_Name: LOCALHOST
Server_Port: 5000
Template_Description_Override: Dumps specified database(s).
Template_Group_Path_Override: Backups
Template_Language: en
Template_Name_Override: Backup Database to Disk Template
Template_Version_Override: 3.1
Template_XML_File:
/opt/sap/ASE-16_0/jobscheduler/Templates/xml/en/SybBackupDbToDiskTemplate.xml
----------------------------------------------------------------
Reading XML File:
/opt/sap/ASE-16_0/jobscheduler/Templates/xml/en/SybBackupDbToDiskTemplate.xml
XML File Read Completed Successfully
Creating Initial Template Record
SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection
refused
SQLException during getConnection: java.sql.SQLException: JZ006: Caught
IOException: java.net.ConnectException: Connection refused
Exception : SQLException when trying to connect
SQLException: java.sql.SQLException: JZ006: Caught IOException:
java.net.ConnectException: Connection refused
Exception in thread "main" java.lang.NullPointerException: while trying to
invoke the method
com.sybase.util.template.Connection.execUpdate(java.lang.String) of a null
object loaded from field com.sybase.util.template.TemplateBase._conn of an
object loaded from local variable 'this'
at com.sybase.util.template.TemplateBase.execUpdate(TemplateBase.java:3296)
at
com.sybase.util.template.TemplateBase.createTemplate(TemplateBase.java:2311)
at
com.sybase.util.template.TemplateImport.importTemplate(TemplateImport.java:436)
at
com.sybase.util.template.TemplateImport.mainRoutine(TemplateImport.java:360)
at com.sybase.util.template.TemplateImport.main(TemplateImport.java:348)
Server 'LOCALHOST_JSAGENT' was not created.
Failed to Configure New Job Scheduler
PRESS <ENTER> TO CONTINUE:
===============================================================================
Installation Completed
----------------------
The product configuration failed.
Please check the product configuration log files in
"/opt/sap/ASE-16_0/init/logs" and consult Sybase Customer Service & Support at
http://www.sybase.com/support.
If you have not done so, please go to https://sybase.subscribenet.com to obtain
the Sybase software licenses.